เครื่องชั่ง Weight scale radwag pue c41h indicator
Modular construction (depending on needs electronic set is easily extended by additional modules installed inside the indicator housing):
เจ้าหน้าที่จะติดต่อกลับพร้อมใบเสนอราคาภายใน 24 ชม.
รายละเอียดสินค้า
เครื่องชั่ง Weight scale radwag pue c41h indicator
Basic functions of a
indicator
PUE C41H series:
- Measuring units: [g], [kg], [N], [ct], [lb], [oz];
- Automatic dosing: single and dual threshold;
- Preparing mixtures according to set formulation;
- Tarring in whole measuring range;
- Automatic tare, tare memory, manual setting of tare mass;
- +/- control of
mass
with set standard; - Percent setup with set standard;
- Averaging of
weighing
result, digital filter; - Control of Power Supply from batteries;
- Adjustable backlight on powering by battery;
- Timer switch off;
- Adjustable baud rate between 2400-115200bit/s;
- Continuous data transmission through RS 232;
- Manual or automatic mode for RS 232;
- Weighing loads with switched off autozero function;
- Measurement of maximum force influencing the
weighing
platform; - Measurement of force influencing the weighing platform in Newtons;
- Control of start mass;
- Slot for connecting an additional LCD display;
- Totalizing mode;
- Modular construction (depending on needs, electronic set is easily extended by additional modules installed inside the
indicator
housing):- AN 0-10V, AN 4-20mA, AN 0-20mA - analog modules
- PK 1 - additional relay modules
- DP 1 - additional A/D relay module
- WE 8, WE 4 - IN/OUT module
- RS 1D - RS 485 module
- ET 1G, ET 1D - Ethernet module
DATASHEET
| Maximum quantity of verification units |
6000 e |
| OIML Class |
III |
| Display |
LCD (backlit) |
| Protection class |
IP 68 (1h max)/69 |
| Database capacity |
4 MB |
| Inputs/Outputs |
3 Optoisolated inputs, 3 Outputs kontaktronowe |
| Optoisolated Interfaces |
RS232, RS485 |
| Ethernet module (option) |
accordant with standard 10/100Mbit/s |
| Input/Output module (option) |
8 optoinsulated outputs, 8 optoisolated inputs |
| Analog output module (option) |
4-20mA, 0-20mA, 0-10V |
| Inputs/Outputs (option) |
4 Optoisolated inputs, 4 Outputs kontaktronowe |
| Relay module (option) |
4 relays with short circuiting switch |
| Additional weighing platform module |
metrological parameters as in the main weighing platform |
| Power supply |
100 ÷ 240 V AC 50 / 60 Hz and battery |
| Operation time on batteries |
9 h (average time) |
| Maximum quantity of divisions from converter |
838 860 ×10 |
| Maximum increase of signal |
19 mV |
| Minimum volatge per verification unit |
1.0 µV |
| Maximum voltage per verification unit |
3.3 µV |
| Minimum load cell impedance |
90 Ω |
| Maximum load cell impedance |
1200 Ω |
| Load cell excitation voltage |
5V DC |
| Connection of load cells |
4 or 6 wires + shield |
| Operating temperature |
-10 ÷ +40 °C |
| Atmospheric humidity |
10% ÷ 85% RH no condensation |
| Keypad |
membrane |
| Housing |
stainless steel |
| Packaging dimensions |
320×220×210 mm |
| Net weight |
3.7 kg |
| Gross weight |
4 kg |
