SIBATA Personal Dust Monitor LD-6N2

Personal Dust Monitor LD-6N2

● This small, lightweight dust indicator is for measuring a worker’s personal exposure to dust.
● Measurement values can be displayed either in terms of accumulated count or instantaneous value by switching between them.
● The measurement range is from 1 to 100,000 cpm. (The upper measurement limit of 100,000 cpm is for the relative concentration range used to determine instantaneously high concentration peaks, and is not guaranteed for measuring continuously high concentrations. Consider the regular concentration range to be 10,000 cpm or less.)
● Measurement values can be stored in the unit’s memory when the data logging function is used.
● The measurement values stored can be transferred to a computer using special software.
● The relay cable between the detector unit and the controller is removable, simplifying storage.
● The detector unit can stand independently using the optional stand.
● Clips are included to fasten the detector unit and relay cable to the worker.

Item Code	080170-22
Model	LD-6N2
Measurement Principle	Light Scattering Method
Measurement Range	1~100,000 CPM (0.001~100mg/m3)
Measurement Accuracy	Against indicated value±10%±1 count(Satandard Varticle)
Light Source	Laser Diode
Measurement Sensitivity	.001mg/m3(for standard particles)
Output	USB connector:Measurement data serial port Output connector:Pulse output/External device control signal output/Data output for external signal unit
PC	Model in which above OS can operate
CD Drive	One CD drive is necessary (at Installation)
Communication Port	One USB A connector port is necessary. This function must work properlly in computer.
Function	/zero cancellation(Measurement for 6 seconds)/sensitivity correction(Measurement of scattered plate for 1 minute)/Manual measurement (manual operation)/Down timer measurement/Mass concentration conversion/Data logging(Memory recording of measured values)/Communication function
Data Logging	Measurement start time setting/Maximum measurement time setting Recording cycle setting/Recordable 40,000
Display Content	Accumulated count:1~99,999(unit count) Instantaneous value: 1 to 99,999 (unit: CPM) Mass concentration conversion value (unit: mg / m3 only after measurement) Battery level display
Power Supply	AC power supply, USB power supply, or internal nickel metal-hydride batteries Battery charging time : About 4hours ; Battery operating time : About 10hours
Dimensions/Weight	Detection unit : 100(W)x37(D)x72(H)mm (Installing the air intake) Main unit : 70(W)x35(D)x105(H)mm (ExcluDing protrusions) Relay cable 1m Approx. 0.5kg(Detection unit, Main uni, Relay cable)
Accessories	AC adapter (AC power / charging), 3 clips, standard scattering version and zero filter (with filter / protective cap), LD-6N / 6N2 software (CD-ROM), USB cable (A-miniB Type), software Case (for storing the operation unit)
Others	Those that have been completely confirmed to work under the above OS