Amada miyachi ml-9602a yag thg laser marker machine

MIYACHI ML-9602A YAG THG LASER MARKER

Processing at double the speed with twin beams. High-speed processing in a wide marking area, optimum for mass production.

 About laser beam.

1. Miyachi laser devices are Class 4 lasers. Exposure to direct, scattered or reflected laser light is extremely hazardous. Never expose eyes to laser irradiation.

2. Always wear protective eyewear within the area where laser light may reach. (Protective eyewear is included in the accessories.).

3. Never aim the laser at any part of your own body or other people. Exposure to laser beams will cause severe burns.

4. Never aim the laser at any direction other than the processing area. Cover the laser with a shield made of a light absorbing/dispersing material that can withstand high temperatures.

5. Never apply the laser beam to flammable or combustible materials. It will cause a fire.

About high voltage.

1. Before exchange the pumping lamp or taking off the cover of the power supply,

turn the power OFF and wait at least 5 minutes after turning OFF power. Make

sure that discharging of the capacitor is completed before starting work.

2.Always ground the ground terminal.

About handling of laser devices.

1. Appoint a laser safety supervisor.

2. Partition off all areas that may be exposed to laser light and supervise there.

3. Never attempt to disassemble, repair or modify the devices.

4. For other details, refer to the following standards, etc.

S MARK.

Enable high-speed marking at a rate of 550 characters a second.

Support a processing area of 100 × 100 mm and equipped with a guide light as standard

Optimum for use in lines when equipped with an optional communication function

Enable setting and registration of many schedules by adding an I/O expansion card

Adoption of a fully air-cooled and space saving design.

ML-7112AH/AI.

Reasonable laser markers selectable from two types.

Valuable units equipped with a combination of commonly used optical parts

as standard.

Choose from two types of oscillators: Right angle type (standard) and straight type (vertical type).

Suitable for deep engraving, black and white marking, trimming, coating removal, cutting and scribing.

Offers a wide variety of optical specifications to choose from, such as a f-theta lens and a beam expander lens.

Contains a chiller and thus requires no water piping.

Screen configuration easy for beginners to use.

ML-7064A.

50W, the top-level power in the industry, enables various.

kinds of processing at high speed.

Notes.

Miyachi laser products conform to the following standards.

JIS C 6801.

JIS C 6802, IEC 60825-1.

CE (Some products).

*Please contact us for further details.